Optelec ClearView+ - Technical Specifications

Optelec ClearView
+
English Page 28
9. Contacting Product Support
If you have questions about operating, installing or setting
your ClearView
+
, please contact your Optelec distributor or
the Optelec office nearest you. See the last pages of this
manual for a complete list of Optelec addresses.
10. Warranty Conditions
Optelec warrants the ClearView
+
, effective from the date of
delivery, to be free of any defects in material and
workmanship.
The warranty is not transferable and does not apply to
groups, multi-users and agencies. The ClearView
+
was
designed for the individual purchaser to be used at home
and work. Optelec reserves the right to repair or replace any
purchased ClearView
+
with a similar or improved product.
In no event shall Optelec or its suppliers be held liable for
any indirect or consequential damages. The original user’s
remedies are limited to replacement of ClearView
+
modules.
This warranty is valid only when serviced in the country of
original purchase, and with intact seals. For additional
warranty claims or service during or after warranty period,
please contact your Optelec distributor.
Optelec is not responsible for any uses of this device other
than those described in this manual.