Optelec ClearView+ - Find function (position locator); Pointer (position locator)

Optelec ClearView
+
English Page 15
Locking the reading table
Lift the red lever located at the
front of the table to lock the
table in a stable position. This
is very useful when writing,
painting and doing hobbies and
crafts. Unlock the table by simply lifting the lever once
again.
Please note: When the ClearView
+
power is off, the
brake will automatically lock into position. When the
ClearView
+
is switched on, the brake will unlock. Make
sure to push the reading table backwards to its home
position prior to turning off.
Using the footswitch
The optional footswitch on the PC unit allows you to toggle
between the image of the ClearView
+
and a connected PC
(computer) or other connected VGA source, such as an
external camera as well as providing Picture-in-Picture. The
footswitch on a Monochrome, Color or HD unit allows you to
toggle between the images of the ClearView
+
and of an
external source such as a PC (computer).
Please note: If your ClearView
+
Color unit is equipped
with a 22” TFT monitor, the footswitch allows you to
toggle between the ClearView
+
image, vertical split-
screen (showing both the ClearView
+
image and
computer image in the ratio 50:50) and full screen
computer image.