Opticon H-27 - Charging the Battery

GETTING STARTED: Charging the Battery
6
ENGLISH
Charging the Battery
1. Open the USB cap.
2. Connect the device using the DC to USB cable and power adaptor.
3. Plug the other end of the power adaptor to the wall outlet to start charging.
NOTE: H-27 can be charged with the supplied power adaptor and DC to USB cable
from a PC via USB, via H-27 cradle, or any micro USB charger which is
compliant with USB battery charging 1.2 (http://www.usb.org/developers/
devclass_docs/USB_Battery_Charging_1.2.pdf). Using improper adaptor,
cradle or cable might cause damage to the device and void the warranty.
When the battery is charging:
• The status LED lights red.
• When the device is turned on, the icon is displayed on the top-right corner of
the screen.
1
2
2
3