3. Replace the cover.
Notes:
¥ If you will not be using the remote
control for a month or more, remove
the batteries.
¥ You can use the remote control up
to a distance of about 23 feet (7
meters) in front of the VCP. If it does
not operate properly within this dis-
tance, replace the batteries.
Warning: Always dispose of old batter-
ies promptly and properly.
VCP STATUS DISPLAY
VCP Status Displays tell you the status of
the tape inserted and VCP function.
VCP Status Display appears on the TV
when a VCP function starts, like when
you select a different VCP mode. For
example, pressing STOP while the VCP
is in PLAY mode show STOP in the
display. Press DISPLAY on the remote at
any time (except special effect playback
mode) to see the status display.
① ②
③
① Tape speed display
EP = Extend Play
LP = Long Play
SP = Standard Play
② Current mode of operation display
STOP, PLAY, FF(Fast Forward) etc.
③ Real-time tape counter display
Note:
¥ If the VCP status display does not
appear on the TV screen, check the
FUNCTION OSD option on the
MENU. Select ON to see the
display.
HOW TO ACCESS MENU
1. Press MENU to see menu.
2. Press the SELECT ▼ or ▲ to use
choose desired option to be changed.
Then you set desired mode by
pressing the OK button repeatedly.
3. Press MENU to exit menu, or wait a
few minutes and the VCR returns to
normal operation.
AUTO REPEAT
If you want to play back tape repeatedly,
set AUTO REPEAT option to ON. (See
ÒAuto Repeat PlaybackÓ on page 16.)
F.(Function) OSD
Switches the VCP status display ON or
OFF.
15
PLAY SP
Ð1:35:45
MENU
AUTO REPEAT OFF
F.OSD ON
SELECT: ▼▲, OK END:MENU
To Next Page
Loading...
