OPTOKON EDFA User Manual

FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
ACT_01-07_EN-M
14/11/2011
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON a.s., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, INFO@OPTOKON.CZ
1
EDFA Optical Amplifier
CLA - CZECHLIGHT AMPLIFIER
DEVICES
USER MANUAL
(PLEASE READ IT BEFORE USE)
Manufactured under the licence of
Revision 2.4

OPTOKON EDFA Specifications

General

Brand	OPTOKON
Model	EDFA
Category	Amplifier
Language	English

Summary

Description of CLA amplifier

General Information

Safety precautions

General warnings for safe installation, commissioning, and operation of equipment.

Optical interface connection

Guidelines for connecting optical interfaces, including safety rules for lasers and connector cleanliness.

Laser classification

Packaging and standard accessories

Technical specification

Basic configuration

Mechanical design

Front panel

Description of the components and indicators found on the front panel of the device.

Display (only version with display -D-)

Monitoring port (1% of output No. 1 power)

Rear panel

Starting operation

Communication with the device

Command line

Before Login to the CLA

Explains prerequisites and considerations before logging into the Command Line Interface.

Login to the CLA

IP address setting

Instructions for configuring network interface IP addresses via configuration files.

FIREWALL

FIREWALL START

Command to enable the firewall system after configuration.

FIREWALL STOP

Command to disable the firewall system, useful for troubleshooting connectivity.

CLA Admin

Accessing the console for EDFA unit configuration and reporting.

Web administrator interface

IP address setting

Setting default IP address for the ETH0 interface for web access.

Connection to the CLA

Steps to connect to the CLA using a web browser via HTTPS.

Summary

Summary EDFA parameters

Displays key parameters of the EDFA unit, including SN, Pin, Pou, Temperatures, and ALARMS.

Summary System information

Summary Device parameters

Displays device-specific parameters such as voltage, fan speeds, and case temperature.

Summary Network settings

Summary Firewall settings

Displays the current firewall status, access rules, and IP list configuration.

Amplifier

Expert mode

Health

Network

Firewall

SNMP

Postman

Log

System

Base device information

Date and Time

Allows setting the system's date and time via timeserver or manual input.

Web interface secure

Restore

Service for setting the device to default status or loading backup configuration files.

CLA Reboot

Load default settings and restart

Resets device settings to factory defaults or EDFA unit defaults and restarts the system.

Logout

Display password (optionally)

Option to set or disable a password for the display module service.

Display

Main menu

Lists the main menu items accessible via the device's display and navigation buttons.

Main menu -> Overview

Displays basic EDFA status information, including mode, temperature, and power levels.

Main menu -> Alarms

Main menu -> Parameters

Allows viewing of technical and optical parameters for the EDFA units.

Main menu -> Parameters -> EDFA 1

Main menu -> Parameters -> EDFA 1 S1

Provides reports on electrical and optical parameters for EDFA 1 Stage 1.

Main menu -> Settings

Main menu -> Settings -> EDFA settings

Enables modification of the EDFA optical parameters.

Main menu -> Settings -> EDFA settings -> EDFA 1

Main menu -> Settings -> EDFA settings -> EDFA 1 S1 (Standard mode)

Enables changing the working mode and alarm thresholds for EDFA 1 Stage 1.

Main menu -> Settings -> EDFA settings -> Expert / Standard mode

Main menu -> Settings -> Network settings

Allows the user to modify network configuration settings for the device.

Main menu -> Settings -> Network settings -> Set display password

Main menu -> Screensaver

Activates the screensaver on the display module after a period of inactivity.

Main menu -> Help and About

Provides help information, firmware version, and details about the creators.

Detailed EDFA Command set

EDFA education and Application note

EDFA education

Basic information about EDFA systems, term definition, and block scheme.

Application note

Alarms

Contacts: