OPTOKON EDFA - Detailed EDFA Command set

EDFA optical amplifier – user manual
49
12 Detailed EDFA Command set
ACC{sp}[1,2]{sp}<value>{cr} Set Pump Currents in mA in ACC mode
Set the pump currents in mA in ACC mode.
Example usage:
ACC{sp}1{sp}200{cr}
Reply is:
ACC{sp}1{sp}200.0{cr}
the laser 1 is supplied at 200 mA.
ACC{sp}[1,2,A]{cr} Report Pump Currents in mA in ACC mode
Report the pump currents in mA in ACC mode.
Example usage:
ACC{sp}1{cr}
Reply is:
LASER1:{sp}200.0{sp}mA{cr}
the laser 1 current is 200 mA.
Example usage:
ACC{sp}A{cr}
Reply is:
ALL:{sp}200.0{sp}700.0{cr}
AGC{cr} Report the gain set in AGC mode.
Example usage:
AGC{cr}
Reply is:
AGC{sp}1:{sp}30{sp}dB{cr}
AGC{sp}2:{sp}17{sp}dB{cr}