Optoma Projector Instructions

EN-47
True 3D Video Compatibility table
 If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode
 1080i@25hz and 720p@50hz will run in 100hz; other 3D timing will run in 120hz
Video Compatibility
Input Resolutions
HDMI 1.4a
3D Input
Input timing
1280 X 720P @ 50Hz Top - and - Bottom
1280 X 720P @ 60Hz Top - and - Bottom
1280 X 720P @ 50Hz Frame packing
1280 X 720P @ 60Hz Frame packing
1920 X 1080i @50 Hz Side- by-Side (Half)
1920 X 1080i @60 Hz Side- by-Side (Half)
1920 X 1080P @24 Hz Top - and - Bottom
1920 X 1080P @24 Hz Frame packing
HDMI 1.3 1920 x 1080i @ 50Hz
1920 x1080i @ 60Hz
1280 x 720P @ 50Hz
1280 x 720P @60Hz
Side-by-
Side(Half)
SBS mode
is on
1920 x 1080i @ 50Hz
1920 x1080i @ 60Hz
1280 x 720P @ 50Hz
1280 x 720P @60Hz
Top-and-
Bottom
TAB mode is
on
480i HQFS 3D format is
Frame
sequential
NTSC NTSC M/J, 3.58MHz, 4.43MHz
PAL PAL B/D/G/H/I/M/N, 4.43MHz
SECAM SECAM B/D/G/K/K1/L, 4.25/4.4 MHz
Component 480i/p, 576i/p, 720p(50/60Hz), 1080i(50/60Hz)
1080P(24/50/60Hz)
SDTV 480i/p, 576i/p
HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080P(50/60Hz)

Optoma Projector Specifications

General

Brand	Optoma
Model	Projector
Category	Projector
Language	English