Optoma TX7156 - 6 Calibration

Delta Elec. Inc. EP7155i & EP1691i
Company Confidential Optoma_______________________ Delta____________
75
2010/01/11
6. Calibration
Step of into Service Mode
Step 1 : To turn on the projector, press the Power button on the keypad or IR controller,
.
Until the “Power Off? Press Power again” message appears.
Step 2：Then press “Left”=>“Right”=>“Down”=>“Up” button on the keypad or IR controller.
Step 3：If password is correct then go into Service Mode。