EasyManuals Logo

Optoma UHD35x User Manual

Optoma UHD35x
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
English
32
USING THE PROJECTOR
WCG_HLG: This mode enables the wide colour gamut for HLG content providing more accurate and
true to life color performance.
Note: When enabled, this mode will activate the shutter which will reduce the brightness. This mode
is only available when viewing content with HLG metadata. And it is not available when input
source @ HDMI1.
ISF Day: Save professionally calibrated picture settings optimized for day time viewing.
ISF Night: Save professionally calibrated picture settings optimized for night time viewing.
ISF 3D: Save professionally calibrated picture settings optimized for 3D viewing.
Note: ISF modes need to be professionally calibrated. To unlock and access ISF modes, you will need to enter the
following code using the remote or keypad: Power > Up > Down > Up > Up.
Wall Color
Designed to adjust the colors of the projected image when projecting on to a wall without a screen. Each mode
has been ne-tuned by our expert colour team to ensure superior color performance. There are several predened
modes that you can choose from to suit the colour of your wall. Select between o󰀨, blackboard, light yellow, light
green, light blue, pink, and gray.
Note: For accurate color reproduction, we recommend using a screen.
Dynamic Range
Congure the High Dynamic Range (HDR) setting and its e󰀨ect when displaying video from 4K Blu-ray players and
streaming devices.
Note: VGA does not support Dynamic Range.
HDR/HLG
O󰀨: Turn o󰀨 HDR or HLG processing. When set to O󰀨, the projector will NOT decode HDR or HLG
content.
Auto: Auto detect HDR signal.
HDR Picture Mode
Bright: Choose this mode for brighter more saturated colors.
Standard: Choose this mode for natural looking colors with a balance of warm and cool tones.
Film: Choose this mode for improved detail and image sharpness.
Detail: The signal comes from OETF conversion to achieve the best color matching.
HLG Picture Mode
Bright: Choose this mode for brighter more saturated colors.
Standard: Choose this mode for natural looking colors with a balance of warm and cool tones.
Film: Choose this mode for improved detail and image sharpness.
Detail: The signal comes from OETF conversion to achieve the best color matching.
HDR Brightness
Adjust the brightness level of HDR.
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of di󰀨erence between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Optoma UHD35x and is the answer not in the manual?

Optoma UHD35x Specifications

General IconGeneral
Product colorWhite
Product typeStandard throw projector
Market positioningHome cinema
Native aspect ratio16:9
Projection distance1.21 - 9.9 m
Vertical scan range24 - 120 Hz
Horizontal scan range31 - 135 kHz
Projection technologyDLP
Supported aspect ratios3:4, 16:9
Contrast ratio (typical)1000000:1
Screen size compatibility33 - 300 \
Projector native resolution2160p (3840x2160)
Keystone correction, horizontal-40 - 40 °
RMS rated power10 W
Number of built-in speakers1
Built-in displayNo
Lamp power240 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)10000 h
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)305 W
Power consumption (standby)0.5 W
Offset105 %
Focal length range15.84 - 17.42 mm
Supported 3D formatsFrame packing
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Operating altitude0 - 3000 m
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)10 - 85 %
Noise level28 dB
Number of OSD languages10
Noise level (economic mode)26 dB
On Screen Display (OSD) languagesCHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS
Weight and Dimensions IconWeight and Dimensions
Depth270 mm
Width315 mm
Height118 mm
Weight3980 g

Related product manuals