The right imaging distance is about 2 cm (0.8 inch). Eye cup must be compressed approximately half
way down. Aim help circle on the display guides to take image once it turns from red to green.
Camera is stabilized by keeping the outer side of the hand against the patient’s forehead. Example of
the correct usage position is shown below:
9. Still image is captured by pressing the shutter button all the way down. If half-press capture is
enabled, still image can be captured by pressing shutter button halfway down. Taken image is
displayed on screen until user clears the image by pressing shutter button, left or right soft key.
Instant review can be enabled/ disabled in the Smartscope EY4 optics menu.
10. Image can be zoomed in instant preview by pressing middle key. There are four zoom levels (1, 2, 4,
8). Pressing middle key activates the next level. Move around the image by using arrow keys. Scroll
between images by using left and right arrow keys.
11. Video is captured by keeping shutter button down. If half-press capture is enabled, video image can
be captured by pressing shutter button halfway down. Video capturing is finished by pressing shutter
button all the way down.
12. If multiple patients are examined during one session, new file folder is created for each patient by
pressing middle key for over 3 seconds.
13. Transfer images to a PC after capturing images. Images are transferred via USB connection to the PC
when camera is placed to the cradle or images are automatically transferred wirelessly to the PC if
WLAN connection is active. Smartscope works as any other digital camera.
14. To erase the image/video manually, choose Menu, then Preview Images. There will be an option to
erase a specific image or a specific folder.
15. When camera is removed from the cradle it verifies image data storage erase. It is recommended that
image data storage is always erased before images are captured of a new patient.
To Next Page
Loading...
