Place PC and cradle outside the patient environment (at least 1.5 meters distance from the
patient).
Use only accessories and battery provided by Optomed with this product.
Connection between camera and workstation is USB and/or WLAN. Any authorization
procedures should be carried out in workstation.
Images and videos can be copied from camera to workstation via USB and/or WLAN and
then viewed in workstation.
USB write protection is on by default. When protection is on this feature will prevent
writing to camera memory card from PC when connected to the cradle. In case device has
WLAN functionality, USB write protection must be turned off.
USB connection works without power cable. There is no USB charging in M5
No modification of this equipment is allowed.
To Next Page
Loading...
