Restore factory settings
Press middle key to restore factory defaults selection. Note that also Wireless password is restored to
default.
SD card firmware update mode
In case the device has WLAN functionality, SD card firmware can be updated by pressing middle button.
The device must be placed on cradle for SD card firmware update. If PC prompts a message to insert the
SD card, press any camera key to continue update. For more specific instructions, see Appendix C.
Date
Press middle key to change date settings. Date can be set using the up and down arrow keys. Move
between day, month and year by pressing the left and right keys. Date format is DD MM YYYY for Finnish,
German, French, Italian, Spanish and Portuguese. Date format is MM DD YYYY for Japanese and Chinese.
Time
Press middle key to change time settings. Time can be set using the up and down arrow keys. Move
between hours and minutes by pressing the left and right arrow keys.
Camera SW version
This item in Device menu tells the camera SW version.
Start query
User can choose start-up query between erasing images, creating new patient folder or no query at all.
When erasing images is chosen as the query the camera will prompt user on start-up whether all images
and videos shall be deleted. When new patient folder query is chosen the camera will ask if a new patient
folder shall be created upon start-up to prevent from mixing images with previous patient. If no query is
selected then camera will go directly to live view upon start-up.
Wireless
By default, wireless connection is on. User can enable or disable wireless connection. When wireless
connection is enabled, the wireless symbol is shown on display next to the battery level indicator.
Wireless info
Press middle key to view wireless connection information. ‘WLAN SSID’ and ‘WLAN Password’ are shown.
7.6. Patient editor
Patient information usage can be enabled / disabled. There can be maximum 500 patients on the list.
Name of the patient is shown in low right hand side above right soft key, if current folder is linked to a
patient.
7.6.1. Adding new patient
User can add new patient from Device menu by selecting Edit Patient list. User can add Patient ID and
Patient name after choosing New patient. New patient can be added also after creating new folder.
To Next Page
Loading...
