New Patient Folder
A new patient folder is created by pressing middle key when the new patient folder selection is active in
Device menu. A new patient folder can also be created by pressing Middle key for 3 seconds when in live
view. If the current patient folder is empty a new folder cannot be created.
Erase Image Memory
Image memory can be erased by selecting “Erase Image Memory” in Device menu. This selection is
activated by pressing middle key. The camera also prompts the question “Erase image memory?” when
camera is powered on or removed from cradle.
Edit patient list
User can add or remove patients from patient list.
Patient information
Enable or disable patient information linking.
Display brightness
The Display brightness selection has three options: low, medium and high. Choose the suitable level of
display brightness according to for example how the examination room is lit up.
Icons
The icons shown on camera screen can be enabled or disabled to the user’s liking. The most essential
icons such as Menu icon are always visible.
Sounds
By default the camera makes a sound during image capture. This sound can be turned off from Device
menu.
Keyboard backlight
By default the camera keys have a backlight lit up when the camera is turned on. This light can be turned
off from Device menu if it disturbs the user while taking images.
Language
Camera has nine (9) different languages the user can choose from. Default language is English and the
language selection is always shown in English in menu. If language is changed camera has to be re-started.
USB write protection
USB write protection is on by default. When protection is on this feature will prevent any virus from
entering the camera from a PC when connected to the cradle. In case device has WLAN functionality, USB
write protection must be turned off.
Video file format
Camera has two file formats that user can choose for videos: MPEG4 and MPEG1. MPEG4 is a higher
quality file format but may not be viewed with all video players. MPEG1 format is more widely supported
by different SW applications.
Image transfer method
There are three options for the image transfer method: UMS (USB Mass Storage), WIA (Windows Image
Acquisition) and WLAN.
NOTE: WLAN supported only if device has WLAN functionality.
To Next Page
Loading...
