DRAFT
Proprietary and Confidential
STARTUP
Acme Packet 1100 Hardware Installation Guide 35
2. Type enable and press return to enter superuser mode. The prompt to enter the
superuser password appears.
ACMEPACKET> enable
Password:
3. Enter the superuser password and press return. The system prompt ends with a
pound sign instead of a closed-angle-bracket to let you know are in superuser
mode.
Password:
ACMEPACKET#
4. You can now begin configuring your Acme Packet 1100. Refer to the Acme Packet
Configuration Guide to learn how to establish an IP address for your Acme Packet
1100 System.
To Next Page
Loading...
