Oracle Acme Packet 1100 User Manual

DRAFT
Proprietary and Confidential
34 Acme Packet 1100 Hardware Installation Guide
STARTUP
2. You must connect to the SER MGT console port on initial booting of the Acme
Packet 1100.
SER MGT NET MGT
LNK ACT
INT
LNK ACT
EXT
LNK ACT LNK ACT
12V
T1/E1
Figure 5 - 1. SER MGT Console Port
3. If the Acme Packet 1100 is already powered on, press Enter a few times to
activate the console connection. When ACLI text is displayed on the screen, the
console connection has been successfully created.
4. If you have created the console connection before pow
e
ring up the Acme Packet
1100, you can watch the boot process as it displays on your screen.
Powering On the Acme Packet 1100
This section explains how to power on your Acme Packet 1100.
To power on the Acme Packet 1100 hardware:
1. Following installation of the Acme Packet 1100 in an equipment rack, on a w
all
or freestanding on a table top or shelf, connect all appropriate data cables to the
ports before powering up and configuring the system.
2. There are no ON/OFF switches on the power suppl
i
es. Connect the active
power supply to the chassis, the system will start to boot.
3. The monitor of the console connection will begin to display information.
Initial Login
Once you have established the console connection and powered on the Acme Packet
1100 , you are ready to log in and begin configuring the system. After the Acme
Packet 1100 has been initialized, the ACLI login prompt is displayed in your terminal
application as shown here:
User Access Verification
Password:
If the Acme Packet 1100 completed booting before you connected to the console
port, press Enter a few times to activate the console connection.
System access in the following procedure uses the default user
and superuser
passwords. If you do not have the default passwords, please contact your customer
support representative.
1. At the ACLI password prompt, enter the default system user password and
press <return>. Your entries are not echoe
d on the screen.
User Access Verification
Password:
ACMEPACKET>
From the user prompt you can view various configuration states and operating
statistics on the Acme Packet 1100 System, and you perform configuration tasks.

Oracle Acme Packet 1100 Specifications

General

Brand	Oracle
Model	Acme Packet 1100
Category	Controller
Language	English