DRAFT
Proprietary and Confidential
Acme Packet 1100 Hardware Installation Guide 7
1 Safety
Introduction
This chapter provides an overview of the recommended safety precautions for
installing the Acme Packet 1100.
Before you install your Acme Packet 1100
, Acme Packet recommends that you
review the contents of this chapter. This chapter provides information intended to
protect you and your Acme Packet 1100 from experiencing any harm during the
installation process. This chapter also provides information that helps keep your
Acme Packet 1100 functioning properly and protect it from damage.
General Safety Precautions
To ensure general safety, follow the safety precautions listed in this section.
Fan To avoid overheating the system, do not block the air inlets or the fan vents, or
otherwise obstruct
to the system. Keep the area around the
Acme Packet 1100 clean and clutter-free.
System
Maintenance
Aside from the power supply, there are no other user-serviceable parts associated
with the Acme Packet 1100. Only professionals trained to maintain, adjust, or repair
the Acme Packet 1100 may provide these services.
Environmental
Specifications
Adhere to the Environmental Specifications section in the Specifications chapter of
this guide.
Using This Guide Read and understand all notes of warning and caution included in the Acme Packet
1100 documentation. These warnings and cautions are designed to keep you safe
and protect the Acme Packet 1100 from damage.
Electrical Safety Precautions
To protect yourself from harm and the Acme Packet 1100 from damage, follow the
electrical safety precautions listed in the following subsection.
Precautions • Note the locations of the emergency power-off switch for the room where the
Acme Packet 1100 is located.
• If an electrical accident occurs, remove power from the system immediately by
unplugging the chassis.
To Next Page
Loading...
Need help?
General
