Raise the server so the rear ends of the mounting brackets are aligned with the slide rail
assemblies mounted in the equipment rack.
Insert the mounting brackets into the slide rails, then push the server into the rack until the
mounting brackets encounter the slide rail stops (approximately 12 inches, or 30 cm).
Simultaneously push and hold the slide rail release buttons on each mounting bracket while
you push the server into the rack. Continue pushing until the slide rail locks on the front of the
mounting brackets engage the slide rail assemblies.
You will hear a click.
Caution – Verify that the server is securely mounted in the rack and that the slide rails locks are
engaged with the mounting brackets before continuing.
2
3
4
Tools and Supplies Needed
Sun Fire X2270 M2 Server Service Manual • January, 2012, –1224
To Next Page
Loading...
