Oracle Sun Fire X2270 M2 - Replacing the System Battery (CRU)

Legend
11 Blower modules (3) 12 HD/SSD backplane
13 Removable SATA HD/SSD 3 14 Removable SATA HD/SSD 2
15 Removable SATA HD/SSD 1 16 Removable SATA HD/SSD 0
17 I/O board
See also:
■
“CRU and FRU List” on page 19
Replacing the System Battery (CRU)
The system battery is a CR2032 calculator–type battery.
Replace the system battery if you know it is weak, if after any period of AC power loss the BIOS
loses its CMOS settings, or if the time-of-day clock loses time.
Caution – Loss of data. Removing the battery causes the server to revert to the factory default
BIOS settings.
Caution – Do not attempt to open or service batteries. The battery contains lithium and can
explode if mishandled or improperly disposed.
■
“How to Replace the System Battery” on page 31
▼
How to Replace the System Battery
See:
“Locations of Internal Server Components” on page 30
Prepare the server for service. See “How to Prepare for Service”on page 21.
Remove the air duct. See
“How to Remove the Air Duct”on page 53.
Remove the system battery by pulling and quickly releasing the battery retaining clip.
This action causes the battery to pop out of its socket.
BeforeYou Begin
1
2
3
Replacing the System Battery (CRU)
31