Insert the new system battery into the battery holder with the side labeled“+”facing upward.
Note – Replace the battery only with the identical model.
Install the air duct. See “How to Install the Air Duct”on page 53.
Prepare the server for operation. See
“How to Prepare for Operation”on page 26.
Removing and Installing DIMMs (CRU)
This section contains the following topics:
■
“How to Remove a DIMM” on page 33
■
“How to Install a DIMM” on page 35
■
“Error Correction and Parity” on page 36
■
“DIMM Slot Designations” on page 37
■
“DIMM Population Rules” on page 38
▼
How to Remove a DIMM
See:
“Locations of Internal Server Components” on page 30
Prepare the server for service. See “How to Prepare for Service”on page 21.
4
5
6
BeforeYou Begin
1
Removing and Installing DIMMs (CRU)
33
To Next Page
Loading...
