Oracle Sun Fire X2270 M2 - Page 34

Remove the air duct. See “How to Remove the Air Duct”on page 53.
Locate the DIMM socket in which you want to install or replace a memory module. See
“DIMM
Slot Designations”on page 37
.
Eject the DIMM from the slot by simultaneously pressing down on the ejector levers at both
ends of the DIMM socket.
This action releases the DIMM from the slot.
To remove the DIMM, lift it up and out of the socket.
Prepare the server for operation. See
“How to Prepare for Operation”on page 26.
■
“How to Install a DIMM” on page 35
■
“Error Correction and Parity” on page 36
■
“DIMM Slot Designations” on page 37
■
“DIMM Population Rules” on page 38
■
“Removing and Installing DIMMs (CRU)” on page 33
2
3
4
5
6
See Also
Removing and Installing DIMMs (CRU)
Sun Fire X2270 M2 Server Service Manual • January, 2012, –1234