▼
How to Remove the PCIe Riser
See:
“Locations of Internal Server Components” on page 30.
Prepare the server for service. See
“How to Prepare for Service”on page 21.
Remove the air duct. See
“How to Remove the Air Duct”on page 53.
If a PCIe card is connected to the PCIe riser, remove the PCIe card. See
“How to Remove a PCIe
Card”on page 40
.
Pull the PCIe riser upward to disengage the riser card from the connector on the motherboard.
Install the air duct. See
“How to Install the Air Duct”on page 53.
Prepare the server for operation. See
“How to Prepare for Operation”on page 26.
■
“How to Install the PCIe Riser” on page 42
■
“Removing and Installing a PCIe Card (CRU)” on page 40
BeforeYou Begin
1
2
3
4
5
6
See Also
Removing and Installing the PCIe Riser (CRU)
Sun Fire X2270 M2 Server Service Manual • January, 2012, –1244
To Next Page
Loading...
