Oracle Sun Fire X2270 M2 - Removing and Installing a Power Supply (CRU)

Removing and Installing a Power Supply (CRU)
This section contains the following topics:
■
“How to Remove the Power Supply” on page 45
■
“How to Install the Power Supply” on page 47
▼
How to Remove the Power Supply
See:
■
“Sun Fire X2270 M2 Server Internal Cabling” on page 61
■
“Locations of Internal Server Components” on page 30
Prepare the server for service. See “How to Prepare for Service”on page 21.
Remove the air duct. See
“How to Remove the Air Duct”on page 53.
BeforeYou Begin
1
2
Removing and Installing a Power Supply (CRU)
45