Reference the following illustration for this procedure.
Note the numbered panels.
Disconnect the three power supply cables from the motherboard (1).
Disconnect the power supply cable from the hard drive backplane and push the cable through
the cutout in the chassis divider (2).
Loosen the captive screw that secures the power supply to the chassis (3).
Lift the power supply out of the chassis (4).
“How to Install the Power Supply” on page 47
3
4
5
6
7
Next Steps
Removing and Installing a Power Supply (CRU)
Sun Fire X2270 M2 Server Service Manual • January, 2012, –1246
To Next Page
Loading...
