Oracle Sun Fire X2270 M2 - Page 47

▼
How to Install the Power Supply
See:
■
“How to Remove the Power Supply” on page 45.
■
“Sun Fire X2270 M2 Server Internal Cabling” on page 61.
■
“Locations of Internal Server Components” on page 30
Reference the following illustration for this procedure.
Note the numbered panels.
Insert the power supply into the chassis with the cable bundle toward the front of the server (1).
To secure the power supply to the chassis, fully tighten the captive screw (2).
BeforeYou Begin
1
2
3
Removing and Installing a Power Supply (CRU)
47