Orah 4i - External USB Cards

To Next Page

To Previous Page

Orah 4i User Guide v1.2.0

Using line-In (stereo): You can connect an external microphone or a smartphone/tablet/mp3 on

the box via the frontal jack 3.5.

Note: The sound may not be synchronized with the video. To reach a perfect synchronization,

you can tweak the delay slider(value ranging from -1sec to +1sec).

If the sound comes later than the video, you should decrease the delay value and vice versa.

II. External USB Cards

Orah v1.2.0 release adds support for professional USB audio cards.

We currently support two cards: Focusrite Scarlett 2i2 et Scarlette 18i8.

We will list supported cards as we collect feedback. Any USB audio class compliant device is

expected to detected and work similarly. If you have a different USB audio card, we encourage

you to test it and tell us about it.

1.Using USB audio cards

Hot plugging / unplugging of the card is not supported :

● USB audio card must be plugged in before boot in order to be detected

● USB audio card must not be removed while Orah 4i is running

● Multiple USB audio cards can not be used simultaneously

When the audio card is detected, it will appear as an audio source in the audio settings.

This guide is protected under copyright law