Orah 4i - Orientation; Stabilization

To Next Page

To Previous Page

Orah 4i User Guide v1.2.0

Orientation

I. Stabilization

Ticking the “camera in motion” box keeps the image straight and aligned with the horizon.

The stabilization process can also be used to avoid crooked horizon if the camera is shaking

(during a movement).

You can also feel the need of putting the camera in place upside-down. In this case, once the

installation is done, you can tick the “camera in motion” to level the image of the camera.

You can also rotate the view of the camera manually using the Yaw, Pitch and Roll value.

Add a value between -359 to 359 and click on the “rotate” button to apply it.

It is possible to reset the value pressing the reset button.

This guide is protected under copyright law