OPTIMOD-AM DIGITAL OPERATION
3-65
or to cancel the operation. If you wish to keep the existing archived pre-
set, you can first use a file manager to move the existing user preset in
the Backup folder to another folder and then repeat the backup opera-
tion.
To restore archived presets, system files, and automation files:
In addition to restoring an archived preset to its original Optimod, you can also
copy archived presets from one Optimod to another. The Optimod whose con-
nection is active will receive the preset.
If the preset, system file, or automation file was encrypted when it was originally
saved, PC Remote will request the password under which it was encrypted.
All User Presets are compatible with all 9400 software versions. If Orban
adds new controls to a software version, the new software will assign a
reasonable default value to any control missing in an old User Preset. If
you archive such a User Preset after restoring it, the newly written ar-
chive file will now include the new controls (with the default values,
unless you edit any of these values before you re-archive the preset).
A) Select RESTORE FROM PC from the FILE menu.
A standard Windows dialog box will open.
B) Select the type of files you want to restore using the FILES OF TYPE field at
the bottom of the dialog box.
You can select to restore all 9400 user presets (*.orb94user), system files
(*.orb94setup), and automation files (*.orb94autom).
If you want to restore files from a different directory (i.e., that might
have been created on a different 9400), navigate to that directory from
within the dialog box.
C) To restore a single user preset:
a) Set the
FILES OF TYPE field to a user preset file type (*.orb94user, *.orbu).
b) Select the desired preset in the dialog box.
c) Click the
RESTORE button.
D) To restore all the user presets from a specific location:
a) Set the
FILES OF TYPE field to a user preset file type (*.orb94user, *.orbu)
b) Highlight all the user presets in the dialog window
c) Click the
RESTORE button.
E) To restore a system file:
a) Set the
FILES OF TYPE field to the System Setup file type (*.orb94setup).
b) Select the desired system file in the dialog box.
c) Click the
RESTORE button.
F) To restore an automation file:
To Next Page
Loading...
Need help?
General
