Need help?Do you have a question about the ORBCOMM ST 6100 and is the answer not in the manual?
Provides an overview of the hardware characteristics and specifications for the ST 6100.
Explains safety symbols and note types used in the document for clarity and hazard awareness.
Lists related ORBCOMM documents for supplementary information and developer support.
Describes the ST 6100 as a self-contained, sealed, and compact terminal operating on the IsatData Pro network.
Highlights the ST 6100's design for standalone or integrated solutions, multi-GNSS, and quick installation.
Details the various operational states of the terminal, including transmit, receive, sleep, and idle modes.
Describes peripherals like GNSS, RS-232, RS-485, and LED, and their power consumption impact.
Defines the operating and storage temperature ranges for the ST 6100 terminal.
Details the 10-pin connector and its electrical pin assignment for the ST 6100.
Covers input range, consumption, blockage, load dump, fuse, and inrush current for the ST 6100.
Describes the terminal's four configurable I/O lines and their modes.
Details analog input configuration, measurement ranges, resolution, accuracy, and related factors.
Details the terminal's serial communication interfaces.
Covers RS-232 settings, protection, electrical characteristics, and auto power on/off functionality.
Details the electrical characteristics of the two-wire RS-485 interface.
Provides specifications for RF frequency bands, antenna characteristics, and GNSS performance.
Describes the internal 3D accelerometer for motion detection and its specifications.
Outlines the rugged, impact, and chemical resistant enclosure dimensions and material.
Specifies the terminal's integral LED for indicating power status.
Details the nonvolatile flash memory for firmware and user services, including write-erase cycles.
States the amount of volatile RAM available in the terminal.
Covers environmental test conditions including humidity, vibration, shock, altitude, and temperature.
Provides an overview of the hardware characteristics and specifications for the ST 6100.
Explains safety symbols and note types used in the document for clarity and hazard awareness.
Lists related ORBCOMM documents for supplementary information and developer support.
Describes the ST 6100 as a self-contained, sealed, and compact terminal operating on the IsatData Pro network.
Highlights the ST 6100's design for standalone or integrated solutions, multi-GNSS, and quick installation.
Details the various operational states of the terminal, including transmit, receive, sleep, and idle modes.
Describes peripherals like GNSS, RS-232, RS-485, and LED, and their power consumption impact.
Defines the operating and storage temperature ranges for the ST 6100 terminal.
Details the 10-pin connector and its electrical pin assignment for the ST 6100.
Covers input range, consumption, blockage, load dump, fuse, and inrush current for the ST 6100.
Describes the terminal's four configurable I/O lines and their modes.
Details analog input configuration, measurement ranges, resolution, accuracy, and related factors.
Details the terminal's serial communication interfaces.
Covers RS-232 settings, protection, electrical characteristics, and auto power on/off functionality.
Details the electrical characteristics of the two-wire RS-485 interface.
Provides specifications for RF frequency bands, antenna characteristics, and GNSS performance.
Describes the internal 3D accelerometer for motion detection and its specifications.
Outlines the rugged, impact, and chemical resistant enclosure dimensions and material.
Specifies the terminal's integral LED for indicating power status.
Details the nonvolatile flash memory for firmware and user services, including write-erase cycles.
States the amount of volatile RAM available in the terminal.
Covers environmental test conditions including humidity, vibration, shock, altitude, and temperature.
General| Brand | ORBCOMM |
|---|---|
| Model | ST 6100 |
| Category | Touch terminals |
| Language | English |
To Next Page
