Orbit DripMaster - SECTION 6 COMMON RETROFIT PROJECTS (continued); FLOWER BEDS AND GROUND COVER; SHRUBS AND LARGE PLANTS

Drip M a s t e r
20 21
DripMaster
®
SECTION
6
FLOWER BEDS AND GROUND COVER
Attach a Low-Volume Sprinkler Head on 12" Stake, spaced no more than
10' apart. (See Parts List for spray pattern options)
or
Multi-Stream Dripper on a stake, spaced no more than 3' apart.
(part # 67105 or 69105)
Note: Adjust the flow rate by turning
the flow control on each Drip-
Irrigation sprinkler head.
Common Retrofit Projects
SECTION
6
SHRUBS AND LARGE PLANTS
Use Orbit’s
®
Multi-Stream Dripper on a Stake next to each shrub or large
plant. (part # 67105 or 69105)
Note: Adjust the flow rate by turning
the flow control on each Drip-Irrigation
Sprinkler Head.
Supplies needed:
- Full-Flow 4-Port Manifold (part # 67025 or 69025)
- The appropriate Drip-Irrigation sprinkler head listed above
- 1/4" Distribution/Supply Tube (part # 67300, 67301 or 67303)
- 1/4" High Pressure Clamps (part # 67710 or 69710)
Common Retrofit Projects
No more than 10' apart
No more than 3' apart
Orbit
®
DripMaster
®
| Installation Guide Orbit
®
DripMaster
®
| Installation Guide