Orbit DripMaster - Dripmaster Installation Guide; Orbit

GROUND COVER
1
Supply Line Placement- Run the 1/2” Drip Tubing Supply Line
down the center of the Ground Cover area and install a 1/2” End
Cap at the end of the tubing.
2
Identify Sprinkler Head Locations- Following the
illustrated example, place quarter sprinkler heads in the cor-
ners, half sprinkler heads along the sides, and full spray pattern
sprinkler heads in the center of your ground cover area.
TIP- Spacing should be no more that 10’ from one sprinkler to the next.
3
Using the Hole Punch, make a hole in the top of the 1/2” Drip
Tubing Supply line where you want the first sprinkler to begin
and insert a 1/4” Barbed Coupling into the hole.
Drip M a s t e r
Orbit
®
DripMaster
®
| Installation Guide
64
SECTION
2
CONNECT DRIP TUBING TO
OUTSIDE HOSE FAUCET
guía de
instalación gratis
La mejor opción para regar plantas, árboles,
arbustos, cestas colgantes y jardines
HASTA UN 70%
DE AHORRO DE AGUA
2010
2010