Charging the Camcorder
In case of low battery, the camcorder will give out a prompt tone
『Battery low, please charge timely』. The responses of the controller
buttons may slow down in case of low battery. After the battery is used
up, the indicators will be off after the buttons are pressed.
Charging the camcorder and the controller
❶
Take out the Micro USB cable from the package.
❷
Insert one end of the USB cable into a 5V/1-2A charger or a
computer, and insert the other end into the Micro USB port at the
bottom of the camcorder.
❸
The red indicator is solid while charging, and it will go out after the
battery is fully charged.
★
Required charging time:
Camcorder: 2.5 ~ 3 hours Controller: 0.5 ~ 1 hour
●In case of low battery, the speaker will give out a prompt tone “Low
battery! Please recharge it immediately”.
●Don’t use any USB cable other than the accessories to avoid
faults, overheating, or accidents like fire, electric shock.
●If charging is performed by connecting a computer, it cannot be
guaranteed that the product is recharged continuously if the
computer is in standby status.
●If a charger is used, it must be a domestic regular one of 5V/1-2A.
●Do not operate the product for a long time while it’s being char
ged.
To Next Page
Loading...
