In case the red indicator is off and charging cannot be
performed, the possible causes are as follows:
●The USB cable is not properly connected or the charger fails to reach
required standards. You may reconnect the cable or replace the
charger.
●The battery is old or abnormal.
Using a Memory Card
● Memory card standard
❶
The product is compatible with micro SDXC and micro SDHC
memory cards.
❷
The maximum capacity is 256GB.
● Inserting/removing a memory card
❶
Confirm the camcorder is switched off.
❷
Inserting: According to the Components Guide, open the memory
card slot. Confirm the direction of the memory card and insert it
straightly. It is properly inserted after a『click』sound is heard.
❸
Removing: Gently press the memory card edge to automatically
eject and remove it.
● Formatting a memory card
When a memory card is inserted for the first time, the camcorder will
give out a prompt tone『Please hold the photo button to format the
memory card』. Please press and hold the button for about 5 seconds.
The green indicator flickers rapidly. It stops flickering dozens of
seconds later. The camcorder will give out a prompt tone『Formatting
completed』, meaning the formatting is completed.
To Next Page
Loading...
