Ordro EP7 Pro - Assembly and Disassembly of Camcorder; Headband Assembly; Headband Disassembly

5
Assembly/Disassembly of Camcorder
● Headband assembly
❶ Confirm the left (L) and right (R) sides of the headband, and insert
them into the middle section as shown below until they are
properly installed.
❷ Adjust the length by stretching the front and rear parts.
● Headband disassembly
The headband can be removed by pressing the protruding part shown
below and pulling outwards.
★
Middle
section
Right (R)
Left (L)