EasyManua.ls Logo

Oregon Scientific SE139 - Training Data Recall, Water Use, and Battery Replacement; Recalling Training Metrics and Lap Memory; Water Resistance Guidelines and Precautions; Battery Replacement Procedure and Notes

Oregon Scientific SE139
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
EN
Total exercising time and average heart rate.
Calorie consumed and % fat burn.
You may store up to 44 lap memories into the
Smart
Trainer - Heart Rate Monitor
. These 44 lap memories
will share a total 99:59:59 memory record. Refer to
FIG.
11 to recall various lap memory record.
USE IN THE WATER
The SE139 is water-resistant up to 50 meters (164 feet).
NOTE Set the watch before exposing it to excessive
water. Pressing the keys while in the water or during
heavy rainstorms may cause water to enter the watch.
BATTERY REPLACEMENT
The SE139 uses a CR2032 lithium battery for the
receiver watch and a CR2032 for the heart rate chest
belt. Both are included with the unit.
When the battery of the receiver watch is running low,
the low battery indicator will light up. As for the heart
rate chest belt, it stops transmitting signals when the
battery is dry.
To change the battery, refer to the following diagram,
WATCH
CHEST BELT
Note on Battery: Batteries included (if any) are
for demonstration purpose only. For optimal daily-
usage, application of new alkaline batteries are
recommended.
RAIN
SPLASHES
ETC
OK
SHOWERING
(WARM/
COOL
WATER
ONLY)
OK
LIGHT
SWIMMING/
SHALLOW
WATER
OK
SHALLOW
DIVING/
SURFING/
WATER
SPORTS
OK
SNORKELING/
DEEP
WATER
DIVING
NO
50M /
164 FEET
SE139_EN_R5.indd 10 6/24/08 6:47:06 PM

Table of Contents

Related product manuals