Orion 250i2 EV CNC - Step 16: Home Position Confirmation; Step 17: Add Weld Point; Step 18: Define Point Type; Step 19: Activate Jog Window

29
Step 16:
is is home position.
Step 17:
Click on “Edit” in the menu bar. Drop down and click on “Add
Point.”
Step 18:
Under the point that was just created, click the drop down for
“Type” and select “Weld Point.”
Step 19:
Click the “JOG” icon. is will pull up a JOG window that gives
access to move the Janome Robot around.