Orion c Series User Manual

c Series User Manual
2
Table of Contents
Chapter 1: Setup and Assembly .................. p.5
What is in the Box ............................ p.5
Power Supply Setup .......................... p.5
Microscope Arm Setup ....................... p.6
Microscope LCD Filter Shutter ................ p.8
Become Familiar with the Microscope ....... p.8
Darkening Lens Setup ........................ p.9
Electrode Setup ............................... p.9
Shielding Gas Setup .......................... p.11
Chapter 2: Welder Interface Overview ........... p.12
Basic Screen .................................. p.12
Arc Screen .................................... p.13
Tack Screen .................................. p.14
Save/Load Screen ............................ p.14
Settings Tab .................................. p.15
Media Screen ................................. p.17
Chapter 3: Make A Weld .......................... p.18
Gray Waveform ............................... p.18
Make an Arc Weld ............................. p.18
Make a Tack Weld ............................ p.18
Orion 100c Pulse Arc and Resistance Welder
Weld Modes 3 (micro 1, micro 2, tack)
Pre-Programmed Metal Settings 11
Customizable Save Settings 30 (15 Arc & 15 Tack)
Languages 20 + (Ask rep if we have your language)
Display 5” Capacitive Multi Touch Screen
Energy (Ws) 3 - 100 Ws
Switching Power Supply 110/240VAC (Auto Detected)
Weld Spot Diameter 0.5 - 2.5mm
Footprint (L x W x H) 11.5” x 6” x 6.75” (29 x 15 x 17cm)
Weight 20 lbs (9 kg)
Stereo Microscope Magnification 5x

Orion c Series Specifications

General

Brand	Orion
Model	c Series
Category	Welding System
Language	English