This enables the player to make changes to the melody part(s) of the music “on the fly.” The
accompaniment section will remain LOCKED; therefore all levels and other parameters
pertaining to this section will remain unchanged.
SAVE THE REGISTRATION MEMORIES TO USB DISK
It is possible to SAVE the Panel Memories Registrations Banks to the USB Disk by following
these instructions:
- Insert the USB Disk into the USB socket.
- Press [SAVE] button and the display will show:
XX indicates the progressive file number
001 indicates the registration file number
- The display indicating your Panel Memory Registration Settings are saved to the USB
Disk, with 20 Registration Memories stored to a single file.
New banks of Panel Memory Registration Settings can be stored in the USB Disk and a new
name will be automatically assigned to each bank as follows:
01 REGST 001
02 REGST 002
03 REGST 003
… REGST ......
LOADING THE MEMORY REGISTRATION DATA FROM USB DISK
Insert the USB Disk into the USB socket.
Press and hold the [USB FILES] button to access the Setting files in the USB Disk. Select the
Setting page by pressing the number 3 button.
Use the [+/-] buttons to select the desired Panel Memory Registration Setting file, then press the
[PLAY/LOAD] button, display shows “Load OK”
21
To Next Page
Loading...
