4. SPECIFICATIONS
Bit Meaning
31
43 Software-selectable MCS-mode input sources
44 Uncertainty/statistical preset (SET_UNCERT_PRES)
45 Features vary by input (SHOW_FEATURES depends on device/segment;multi-input MCBs only)
46 Software-selectable HV shutdown mode (SET/SHOW/VERI_SHUT)
47 Software-selectable shaping time constants (SET_SHAP)
48 Explorable shaping time constants (SHOW_CONFIG_SHAP)
49 Advanced shaping time (SET_SHAP_RISE, SET_SHAPE_FLAT, etc.)
50 Software-selectable BLR (ENA/DIS/SHO_BLR_AUTO SET/SHO/VERI_BLR)
51 SHOW_STATUS command supported (returns $M record)
52 Overflow preset (ENA/DIS/SHO_OVER_PRES)
53 Software-enabled, MicroNOMAD-style audio clicker (ENA/DIS_CLICK)
54 Software-readable thermistor (SHOW_THERM)
55 Floating-point fine gain (SET/SHO/VERI/LIST_GAIN_FINE)
56 Software-enabled pileup rejector. (ENA/DIS/SHO_PUR, SET/VERI_WIDT_REJ)
57 Alpha-style HV power (SHOW_HV_CURRENT)
58 Software-readable vacuum (SHOW_VACUUM)
59 Acquisition alarms (ENA/DIS/SHO_ALARM)
60 Hardware acquisition trigger (ENA/DIS/SHO_TRIG)
61 Ordinal numbers for shaping times (SET_SHAP 0, SET_SHAP 1, ...)
62 Query gain ranges (LIST/VERI_GAIN_FINE, ..._COAR, ..._CONV)
63 Routable inputs (SET/SHOW_INPUT_ROUTE)
Beginning of 3rd word
64 External dwell support (ENA/DIS_DWELL_EXT)
65 Selectable SUM or REPLACE MCS modes (ENA/DIS_SUM)
66 External start of pass support (ENA/DIS/SHO_START_EXT)
67 Explorable with MCS list commands (LIST_SOURCE, LIST_LLSCA, LIST_ULSCA)
68 Device supports the MDA preset
69 Software-selectable ADC type (Matchmaker)
70 Has ability to daisy-chain MCBs (DART)
71 ZDT functions available (DSPEC Plus)
72 DSPEC Plus-style Insight triggering (LIST/SET_TRIG_SAMP)
73 Multiple inputs per connection (for example, OCTÊTE Plus)
74 Hardware count-rate meter (SH_CRM)
75 Has multiple ZDT modes (SET/SHOW/LIST_MODE_ZDT)
76 Has multi-nuclide MDA preset
77 Has MCS Replace then Sum Mode (SET_RPLSUM)
To Next Page
Loading...
