SAFETY INSTRUCTIONS
1. Read Instructions: All safety and operating instructions should be read
before operation.
2. Retain Instructions:
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings:
All warnings on the device and in the operating
instructions should be complied with.
4. Follow Instructions:
All operating and use instructions should be
followed.
5. Water and Moisture:
The device should not be used near water
— for example, near a bathtub, wash bowl, sink, laundry tub, in a wet
basement, near a swimming pool, etc.
6. Carts and Stands:
The device should be used only with a cart or stand
that is recommended by the manufacturer.
7. Ventilation:
The device should be situated so that its location or position
does not interfere with its proper ventilation. For example, the device should
not be situated on a bed, sofa, rug, or similar surface that may block the
ventilation openings; or, placed in a built-in installation, such as a bookcase
or cabinet that may impede the flow of air through the ventilation openings.
8. Heat:
The device should be situated away from heat sources such as a
radiator, heat register, stove or other appliances (including amplifiers) that
produce heat.
9. Power Sources:
The device should be connected to a power supply
only of the type described in the operating instructions or as marked on
the device.
10. Grounding or Polarization:
Precautions should be taken so that the
grounding or polarization means of the device is not defeated.
11. Power Cord Protection:
Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the device.
12. Cleaning:
The device should be cleaned only as recommended by the
manufacturer.
13. Non-Use Periods:
The power cord of the device should be unplugged
from the outlet when left unused for a long period of time.
14. Object and Liquid Entry:
Care should be taken that objects do not
enter and that liquids are not spilled into the enclosure through openings.
15. Damage Requiring Service:
The device should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have entered, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
16. Servicing:
The user should not attempt to service the device beyond
what is described in the operating instructions. All other service should be
referred to qualified personnel.
COMMUNICATION WITH OTARI
FOR SERVICE INFORMATION AND PARTS
All Otari products are manufactured under strict quality control. Each unit is
carefully inspected and tested prior to shipment.
If, however, some adjustment or technical support becomes necessary,
replacement parts are required, or technical questions arise, please contact your
Otari dealer or contact Otari at:
Otari, Inc.
4-33-3 Kokuryo-cho, Chofu-shi,
182-0022, Tokyo, Japan
Telephone: +81/4-2481-8626
Fax: +81/4-2481-8633
URL: http://www.otari.com/
email: sales@otari.co.jp
Otari Europe GmbH Otari Singapore Pte., Ltd
Rudolf-Diesel-Straße 12, 12 Tannery Road, #03-07 HB Centre,
D-40670 Meerbusch, Singapore 347722
Germany Telephone: +65/6846-1553
Telephone: +49/2159-50861 Fax: +65/6846-7875
Fax: +49/2159-1778 email:
sales@otari.com.sg
email: info@otari.de
Another part of Otari’s continuing technical support program for our products is
the continuous revision of manuals as the equipment is improved or modified. In
order for you to receive the information and support which is applicable to your
equipment, and for the technical support program to function properly, please
include the following information, most of which can be obtained from the Serial
number label on the machine, in all correspondence with Otari:
• Model Number:
• Serial Number:
• Date of Purchase:
• Name and address of the dealer where the machine was purchased and the
power requirements (voltage and frequency) of the machine.
CAUTION
To prevent fire or shock hazard:
Do not expose this unit to rain or moisture.
Do not remove panels (unless instructed to do so).
There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
PLEASE READ THROUGH THE SAFETY INSTRUCTIONS BELOW.
Ed5 1999-02
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the the literature accompanying the appliance.
To Next Page
Loading...
