oticon Agil - RITE Micro Moulds; Micro Mould for RITE Fittings; Custom Moulds for Receivers; Custom Mould Styles

24
OTICON AGIL FITTING GUIDE
25
The Moulds are a Micro Mould produced from a traditional,
deep impression and is a good choice in cases with retention
problems.
Custom RITE Moulds can be ordered in the following styles:
Canal, canal with lock, skeleton or half shell.
Canal
RITE Micro Moulds for the Standard
or Medium Receiver
The Micro Mould is an acrylic custom solution that can be used
instead of a dome for a RITE fitting.
Micro Moulds and RITE Moulds are produced from a traditional,
deep impression. The Adapter clearly indicates R (red) /L (blue)
colour marking.
Adapter
WaxStop
Up/Down Indicator
Custom Moulds for Standard
and Medium Receivers
Half shell
Skeleton lock
Canal lock