58
OTICON AGIL FITTING GUIDE
59
Memory
Oticon Agils Memory displays instrument usage and environ-
mental data. After the instruments are programmed in Genie
and switched on, they start to collect data and learn.
At a follow-up visit you can open Memory and see the acquired
statistics.
Oticon Agil does not log information while connected to Genie.
Summary provides an overview of the data and learning
collected in the instrument.
Usage displays total instrument and program usage.
Volume control is active for instruments with a volume control
and analyses the use of it.
Signal processing the Envirogram summarizes the overall
sound levels for all general programs.
Life Learning is a feature that helps the instruments adapt
to user preferences and sound environment over time.
The instruments will register the preferred volume setting in
specific situations dependent on level (Soft, Moderate and
Loud) and content (Speech, Speech in Noise and Noise) and
automatically adapts to the preferred setting.
Configuration: Under configuration you can disable Life
Learning and Memory by deselecting the checkboxes.
To Next Page
Loading...
