EasyManua.ls Logo

otometrics MADSEN Astera2 - Page 26

otometrics MADSEN Astera2
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operator desktop microphone Electret microphone
Input voltage: 0.002 to 0.02 Vrms,
Input resistance: 2.21 k.
3.5 mm jack
Assistant monitor headset
40 mW 16
3.5 mm jack
Static force of transducer headbands
TDH 39: 4.5N ±0.5N
Bone vibrator: 5.4N ±0.5N
HDA 300: 10N
USB port connector
Type: USB device port
Interface: USB 2.0
Speed: Full-speed (12 Mb/s)
Transport and storage
Temperature: -30°C to +60°C (-22°F to 140°F)
Air humidity: 10% to 90%, non-condensing
Air pressure: 500 hPa to 1060 hPa
Operating environment
Mode of operation: Continuous
Temperature: +15°C to +35°C (59°F to 95°F)
Air humidity: 30% to 90%, non-condensing
Air pressure: 980 hPa to 1040 hPa.
(Operation in temperatures exceeding -20°C (-F) or +60°C (140°F) may cause permanent damage.)
Warm-up time
< 5 min.
Note Should be extended if MADSEN Astera² has been stored in a cold environment.
Disposal
MADSEN Astera² can be disposed of as normal electronic waste, according to WEEE and local regulations.
26 Otometrics - MADSEN Astera²
16 Technical Specifications

Related product manuals