2. Launch OTOsuite.
3. In the OTOsuite toolbar, click Control Panel.
4. In the Control Panel, click Connect.
7 On-screen controls
Test controls provide a means of operating the audiometer if you use the mouse and on-screen options to perform tests.
• To enable test controls, select Tools> Options> Audiometry> General> On-screen controls > Show> On.
Silence Mode
Silence Mode allows you to control tone levels and presentation by hovering the mouse cursor over the respective on-
screen controls. This is particularly useful when the operator of the audiometer and the person being tested are in the
same room.
• To enable silence mode, select Tools > Options > Audiometry > General > On-screen controls > Silence Mode > On.
• To change the level and frequency by more than one click at a time, use the mouse scroll wheel.
8 PC keyboard controls
You can open a separate PDF-file to have a proper view of the keyboard short-
cuts.
After you install OTOsuite, you can find OTOsuite manuals and related doc-
umentation on your PC. In the Start menu, open OTOsuite Manuals, which
contains an overview with links to all manuals.
Note • The actual position of the keys may depend on your keyboard
type.
9 Toolbar icons in the Audiometry Module
The icons available in the toolbar depend on the test function that you have selected.
12 Otometrics - MADSEN Astera²
7 On-screen controls
To Next Page
Loading...
