97
1
2
3
4
5
6
7
8
11
12
13
A B C D E F
Free mount-
ing positions
2)
Rear wheel size/tyres
22" 24" 24" MTB 26"
1 37 40 41 42
2 38 41 42 43
3 39 42 43 43
4 40 43 44 45
5 41 43.5 45 46
6 42 44 45.5 47
7 43 45 46 48
8 44 46 47 49
9 45 47 48 50
10 45.5 48 49 50.5
11 46 49 50 51
12 47 50 51 52
13 48 51 52 53
The axle can be adjusted horizontally between the front and rear axle position in 6 different positions
(A through F). Position A allows a passive centre of gravity, whilst in position F, the most active centre of gravity is
reached. Unless otherwise specied, the rear wheel position will have the standard setting of C/7.
1) Measured at 0° seat angle, without seat cushion.
2) Mounting positions can be counted on the posterior brace of the rear wheel attachment device (see sketch).
Position
Caster diameter
3" 4" 5" 140 mm 6" 7"
Short caster
fork
Position 4
Position 3 42.4 43.5
Position 2 42.3 43.6 44.7 45.7 46.2
Position 1 43.6 44.9 46 47 47.5 49
Long caster fork
Position 4 46 47 47.5 49
Position 3 46.1 47.2 48.2 48.7 50.2
Position 2 46.1 47.4 48.5 49.5 50 51.5
Position 1 47.3 48.6 49.8 50.7 51.2 52.7
The anterior seat height and posterior seat height are dependent
on the chosen wheel size and mounting position. Please refer to the seat
height table!
Seat inclination: 10 cm maximal seat height difference between
anterior seat height and posterior seat height (equaling a seat inclination
of about 15°).
Without indication of the desired seat inclination, it will be fac-
tory-set at approx. 4°.
To Next Page
Loading...
Need help?
General
