Otto Bock Ventus - Page 34

Axle with camber Shock absorber (medium: see fig.69, long: see fig.70)Rear wheel size
medium long
2)
long
3)
22" 9° 390 – 410 390 – 430 430 – 470
0°/3° 430 – 450 430 – 470 470 – 510
6° 420 – 440 420 – 460 460 – 500
24"
9° 410 – 430 410 – 450 450 – 490
0°/3° 440 – 460 440 – 480 480 – 520
6° 430 – 450 430 – 470 470 – 510
25"
9° 420 – 440 420 – 460 460 – 500
1)
The anterior seat height depends on the selected wheel size, caster fork and mounting position.
Specified at 0° seat angle, without seat cushion
The values indicated are theoretically determined values (max. deviation: 10 mm)
2)
Perforated plate installed at the top in the shock absorber (see fig.70)
3)
Perforated plate installed at the bottom in the shock absorber (not pictured)
65 66
34
Technical data
Ventus