Outback Power Systems MX60 - Page 58

58
OutBack Power Systems Inc.
Press the <-VOC> or <+VOC> soft key to select one
of the 13  xed percentage values. Park Mpp applies
to Auto Sweep Mode if the output current is less
than 5 amps; U-Pick always uses the Park Mpp value.
Press the <NEXT> soft key until the MPPT Mode
screen appears.
Note: After adjusting the Park Mpp values, the user must perform a mini-sweep to activate these
new values.
ADVANCED MENU
Park Mpp
77 % VOC
EXIT NEXT –Voc +Voc