Outback Cuisine - Troubleshooting

23
Troubleshooting
Problem Possible Cause Solution
Burners will not light
using the ignition
system
LP gas bottle is empty Replace with full gas bottle
Faulty regulator Have regulator checked or replaced
Obstructions in burners Clean burners
Obstructions in gas jets or
gas hose
Clean jets and gas hose
Electrode or pushbutton
Ignition wire is loose or
disconnected
Reconnect wire
Electrode or wire is damaged Change electrode and wire
Incorrect electrode gap/ Bent
collector box
The gas collector box around the
electrode needs to be in line with the
burners with a gap of 3 to 4mm
between the end of the electrode and
the tag on the bottom of the collector
box. Realign the collector box as
required.
Flat battery in ignition assembly Replace battery
Poor connection of battery in
Ignition assembly.
Ensure battery is firmly
Pushed onto connectors.
Burner will not light
with a match
LP gas bottle is empty Replace with full gas bottle
Faulty regulator Have regulator checked or replaced
Obstructions in burners Clean burners
Obstructions in gas jets or
gas hose
Clean jets and gas hose
LP gas bottle too small Use larger gas bottle
Obstructions in burners Clean burners
Obstructions in gas jets or
gas hose
Clean jets and gas hose
Windy conditions Use BBQ in a more sheltered position
Gas valve knob
difficult to turn
Gas valve jammed Replace gas valve
Low flame or
flashback (fire In
burner tube - a
hissing or roaring
noise may be heard)