9.Technical Specifications
Performance Characteristics
Sampling rate / relay
time accuracy
Interval(△T) accuracy
(DC - 100MHz)
Single:
±(1 interval time+1 ppm×reading+0.6 ns);
Average>16:
±(1 interval time +1 ppm×reading+0.4 ns)
±2 V (1 mV/div – 50 mV/div);
±20 V (100 mV/div – 1 V/div);
±200 V (2 V/div – 10 V/div)
≥10 Hz (at input, AC coupling, -3 dB)
Rise time (at input,
Typical)
12 bits mode
14 bits mode
Delta Volts between any two averages of
≥16 waveforms acquired with the same
scope setup and ambient conditions (△V):
±(3% rdg + 0.05 div)
△V, △T, △T&△V between cursors,
auto cursor