Oxygen LEPTON - Setting the Vehicle on the Stand (Fig. 13); Brakes (Fig. 14)

14
SETTING THE VEHICLE ON THE STAND (FIG. 13)
Hold the scooter by the handlebar and the rear cover, at the same time
pressing down the lever to the left of the stand.
BRAKES (FIG. 14)
In order to ensure the brakes work perfectly, measure the distance the lever travels before the brake's braking action
actually starts. The freeplay at the very end of the brake lever must be approx. 5/10 mm (FIG. 14). If this is not the
case, contact an authorized Oxygen S.p.A. dealer for a checkup and
possible adjustment.
N.B.: The Lepton scooter also features an effective engine brake which
starts working automatically when the electronic accelerator control is
released.
WARNING: Pay Attention when you use the engine brake because no brake
light works.
Fig. 13
Fig. 14