Oxygen LEPTON - Battery Compartment (Fig.15)

15
BATTERY COMPARTMENT (FIG.15)
There is a compartment under the footboard capable
of housing four 38AH batteries connected in series.
The batteries are reached by removing the cover
of said compartment (FIG. 12) which is fastened at
the front with a lock and at the back by a click-in system.
Before entering the battery compartment,
the ignition key must be removed.
Use the set of quick contacts supplied to fit the Fig.15
batteries, bearing in mind that each connection must
be made between a negative pole (-) and a positive pole (+).
Following the diagram featured on the battery fastening bar, connect the black cable, which ends in a quick-release
coupling, to the negative pole of the battery unit; connect the terminal end of the white cable from the quick-release
coupling kit to the terminal of the fuse carrier and the quick-release coupling end to the positive pole of the battery
unit. Next, connect up the intermediate connections, carefully observing the colour coding to match the terminals and
poles of the batteries.
When disassembling, open the battery compartment, disconnect the quick-release terminals (the positive one first,
then the negative) followed by all the intermediate connections. Finally, remove one battery at a time.
Fig. 15